Bollegraaf HBC 110 K

Technical data baler:
Manufacturer Bollegraaf
Typ HBC 110 K
Year of construction 1994
Operating hours 42,.650 hours, stand September 2022
Press power main press 100 tons
Press power of pre-press 50 tons
Feed channel 1,600 x 1,100 mm
Filling volume 3,15 m³
Theoretic cycle time 19 sec.
Bale size 1,100 x 1,100 mm, lenght variable
Drive power 2 x 30 kW
Tying system 5-fold, vertical, fully automatic
Throughput capacity at a
bulk weight of 30 kg/cbm approx. 16 tons/hour
bulk weight of 50 kg/cbm approx. 25 tons/hour
bulk weight of 100 kg/cbm approx. 47 tons/hour
Bale weight with a bale length of approx. 1.2 m approx. up to 1400 kg, depends on material
Filling volume hydraulic oil tank 1,200 l
SPS controller (manuf., type) Telemecanique TSX 47
Effektive transport dimensions only baler 11,850 x 2,600 x 3,470 mm (l x w x h)
Transport weight baler 38.5 tons

Condition of the baler:
The machine was exchanged for a new press out of running operation and transported away. The baler is immediately available. The press ram is prepared for the installation of an optional horizontal binding, but this was never purchased. The binding is 5-fold vertical.

Scope of delivery:
Exclusively the baler, as shown in the photos.

Comments:
An inspection is possible by appointment. We assume no liability for the technical specifications and any errors.