Hydraulics SAURUS New Part No.: HDL7 HINGED RAMP
AED
10,100
$
2,750
€
2,570
£
2,136
رس
10,315
Hydraulics SAURUS New Part No.: HDL7 HINGED RAMP
Price
AED
10,100
$
2,750
€
2,570
£
2,136
رس
10,315
Condition
New
1
of
20
Hydraulics SAURUS New Part No.: HDL7 HINGED RAMP
1
of
20
Overview
Description
HINGED RAMP
Hinged ramps are ramps that compensate for the height difference between loading and unloading area at an average of +400 / -400mm. Hinged ramps eliminate the problems of approaching the loading area with the help of the flaps. In addition, the electro-hydraulic system facilitates contact between two points. . In order to be able to use the hinged ramp, the site must have been built according to the ramp montage sizes or the site must be convenient to do necessary construction works.
7 tons
490 mm hinged flap
Compatible with european standard EN 1398
Platform floor consists of 6/7 mm sheet with tear pattern
Hinged flap consist of 12/13 mm sheet with tear pattern
Steel construction designed according to load distribution
Ral 9005 and ral 2004 colour
Protection sheet on sides of ramp
Electro-hydraulic system
Hydraulic emergency deceleration mechanism
-10/+40 operating temperature
IP-65 protection class control panel
Rubber bumper montaged on ramp walls
Platform floor supported by two hydraulic piston
Have own chasis
Control panel
Impact blok
HINGED RAMP
Hinged ramps are ramps that compensate for the height difference between loading and unloading area at an average of +400 / -400mm. Hinged ramps eliminate the problems of approaching the loading area with the help of the flaps. In addition, the electro-hydraulic system facilitates contact between two points. . In order to be able to use the hinged ramp, the site must have been built according to the ramp montage sizes or the site must be convenient to do necessary construction works.
7 tons
490 mm hinged flap
Compatible with european standard EN 1398
Platform floor consists of 6/7 mm sheet with tear pattern
Hinged flap consist of 12/13 mm sheet with tear pattern
Steel construction designed according to load distribution
Ral 9005 and ral 2004 colour
Protection sheet on sides of ramp
Electro-hydraulic system
Hydraulic emergency deceleration mechanism
-10/+40 operating temperature
IP-65 protection class control panel
Rubber bumper montaged on ramp walls
Platform floor supported by two hydraulic piston
Have own chasis
Control panel
Impact blok
Hinged ramps are ramps that compensate for the height difference between loading and unloading area at an average of +400 / -400mm. Hinged ramps eliminate the problems of approaching the loading area with the help of the flaps. In addition, the electro-hydraulic system facilitates contact between two points. . In order to be able to use the hinged ramp, the site must have been built according to the ramp montage sizes or the site must be convenient to do necessary construction works.
7 tons
490 mm hinged flap
Compatible with european standard EN 1398
Platform floor consists of 6/7 mm sheet with tear pattern
Hinged flap consist of 12/13 mm sheet with tear pattern
Steel construction designed according to load distribution
Ral 9005 and ral 2004 colour
Protection sheet on sides of ramp
Electro-hydraulic system
Hydraulic emergency deceleration mechanism
-10/+40 operating temperature
IP-65 protection class control panel
Rubber bumper montaged on ramp walls
Platform floor supported by two hydraulic piston
Have own chasis
Control panel
Impact blok
Show more Show less
