2021 MODERNTECH OTHERS

The ZW sweeper is widely used for cleaning concrete surfaces, e.g. sidewalks and parking lots.

The machine uses a segmented polypropylene brush with a diameter of 400 mm and a bristle thickness of 1.6 mm, which, if necessary, can be replaced with a mixed brush (polypropylene + wire).

The ZW sweeper is driven by the PTO. Optionally, a hydraulic drive can be used for work, using the hydraulic section of the machine to which it was mounted.

The functionality of the sweeper is increased by the adjustment of the working angle, which is done mechanically as a standard, and it allows to set the maximum angle of 210. An additional option is the hydraulic adjustment of the working angle with the use of a hydraulic actuator (the required hydraulic section in the machine on which the sweeper will operate).

The sweeper uses an innovative suspension system that gives the machine functions
terrain copying.
The standard three-point linkage mounting is I and II category.
BENEFITS

- Sweeping width: 120cm, 135cm, 150cm
- Compact, rigid structure
- Adaptable to any type of loader, forklift, tractor
- Can be used as a snow blower with snow brushes