2023 SEKO SEPERATOR 50 MD - DRUMSCREEN

1 SEKO SEPERATOR 50 MD Screening plant pulled on a trailer chassis with its own motor to operate the screening plant Suitable for the pre-sorting of green and household waste, wood, plastic, glass and for sifting out the finished compost, but also for sieving: Earth, sand, topsoil, topsoil, green waste, light recycling material, wood chips, construction waste, ash, slag, coal, fertilizer lime, RDF (substitute fuel), commercial waste, shredded tires, wood chips, garbage, waste wood, NawaRo (renewable raw materials), bark, peat , Root stocks / root wood. Easy loading thanks to the low loading edge with a small wheel loader, telescopic loader or an excavator or tractor with a front loader. Feed hopper with sloping walls for rapid material flow to the screening drum Hopper feed belt with hydrostatic operation with speed regulator Drum rotation with hydrostatic operation with speed control option and with a patented system with tangential pull of the drum for easy replacement Drum cleaning brush with very resistant bristles, adjustable for constant reliable cleaning of the holes Rubber discharge belt 1700 mm x 4000 mm for the fine fraction, foldable for transport, with hydraulic control Rubber discharge belt 550 x 4000 mm for the coarse fraction or the oversized grain, foldable for transport, with hydraulic control Single axle with air brakes, wheels, trailer coupling and hydraulic support foot and lighting Parking brake by means of a hand crank on the screening plant Road approval for Austria, max. 25 km / h possible. Easy drum change system. With Perkins brand diesel engine. Central control panel for the functions 50 HP engine Transport length 7744 mm Transport width 2490 mm Transport height 3805 mm with built-in drum sieve Weight 6500 kg Drum diameter 1800 mm Drum length 2515 mm Area of the drum screen: approx. 14.22 m² Sieve diameters from 8 to 90 mm available Sieve hole shapes round or square Sieve material thickness: 8 mm Rotation speed of the sieve: 0-23 revolutions per minute. Adjustable. Feed hopper 1.6 m³ Loading height 2336 mm Output up to 50 m³ / h depending on material and use Material discharge belts 2 Fractions 2 coarse and fine Dimensions when assembled: Length 7744 mm Width approx. 6540 mm Height: 3092 mm Conveyor belts: Conveyor belt for smaller sieve content or light fraction: Length: 4000 mm Width: 1700 mm Unloading height: 2336 mm Conveyor belt for larger parts of the sieve or oversized grain: Length: 4000 mm Width: 550 mm Unloading height: 2336 mm Feed hopper: Hopper length: 2642 mm Hopper width: 1124 mm Bunker volume: approx. 1.6 m³ Automatic central lubrication system. The machine is heavy duty built and strong enough to screen out smaller concrete.